ENGLISH
23
[OPS Control]
• [OPS Power Control]: This feature enables you to control the power of the OPS as you turn on/off the display.
- [Disable]: Disable [OPS Power Control].
- [Sync (On)]: Synchronize the monitor's power status only when the monitor is on.
- [Sync (On/Off)]: Synchronize the monitor's power status with the OPS.
• [Control Interface Selection]: This feature enables you to configure communication with the OPS connected to your
monitor.
- [Display]: Enable communication with external serial ports.
- [OPS]: Enable communication with the OPS connected to your monitor.
[Background Image]
This feature enables you to set the default background image.
• [Booting Logo Image]: Change the logo image that appears when the device boots up. If you set this option to Off,
no logo image appears when the device boots up. Download or initialize an image file on the
storage device.
• [No Signal Image]: Changes the image that appears when there is no signal. If you set this option to Off, no image
appears when there is no signal. Download or initialize an image file on the storage device.
[Input Manager]
You can set the PC or DTV label for each external input.
To Next Page
Loading...
