LG 65EV960H - Page 27

27
206-4322
Ez Download Utility (Cont.)
(Continued from previous page)
Note: In order for the proper TV Zone and/or Wi-Fi Zone prole data to be
applied, the appropriate TV Zone # and/or Wi-Fi Zone # must be set in the Target
TV BEFORE you continue with the Ez Download utility.
4. Insert the USB memory device with the appropriate le(s) into either of the TV’s USB ports.
5. To access the TV Manager from the TV menus:
• Press the button on the Installer Remote to display the TV setup menus (TV is in Pass-
through Mode) or the Function Menu (TV is not in Pass-through Mode).
• If the Quick Settings Menu is displayed at the right of the screen (i.e., the TV is in Pass-through
Mode), select the All Settings menu icon and press the Wheel (OK) button to access the
advanced TV setup menus.
• Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number “7”
key a total of seven times.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
Select the file(s) to download, and then select UPDATE below.
Update TV Software
EV960H_CPU_SW.epk
Update PTC Software
EV960H_PTC_SW.txt
Import Clone File
EV960H_IM.tlx
X
USBDEVICE
TV MANAGER
Ez Download
USB 1: Device Name
Ez Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Current TV Software Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
6. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the le(s) you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the USB DEVICE button at the top right of the screen and
press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the appropriate
USB device from the pop-up list of USB devices.
USB Device
USB 1: Device 1
USB 2: Device 2
(Continued on next page)