LG 65EV960H - Pro:centric Setup

60
206-4322
IP Environment Setup (Cont.)
(Continued from previous page)
If you are modifying the IGMP version, use the Up/Down arrow keys
to select the appropriate version number from the drop-down list of
options, and then, press the Wheel (OK) button.
4. Once all modications are completed as required, use the arrow
keys on the Installer Remote to return to the IP Environment Menu, as
necessary, or press BACK/EXIT to return to the Network Menu and/
or exit the IP Environment Menu.
Wake On LAN Setup
The Wake On LAN feature enables the TV to receive software updates
and/or be powered ON upon receipt of Wake Up Frame packets and/
or Magic Packet data via the wired LAN. To facilitate use of this feature,
note that the appropriate wired connection must be made. This menu
option enables you to specify Wake On LAN parameters.
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select Wake On LAN. Then, press the Wheel
(OK) button.
2. In the Wake On LAN screen, use the Up/Down arrow keys on the
Installer Remote to select/highlight the desired eld and press the
Wheel (OK) button. Then, use the arrow keys to select the desired
setting—Disabled, Update, or Power On—from the drop-down list of
options.
3. Once all elds are completed as required, use the arrow keys on
the Installer Remote to return to the IP Environment Menu, as
necessary, or press BACK/EXIT to return to the Network Menu and/
or exit the IP Environment Menu.
Pro:Centric Setup
Pro:Centric options enable you to congure the TV with the appropriate
settings to connect to the Pro:Centric server. Use the Up/Down arrow
keys on the Installer Remote to navigate between elds.
1. With the IP Environment Menu on display, use the arrow keys on
the Installer Remote to select the Pro:Centric menu option. Then,
press the Wheel (OK) button.
2. Select/highlight the Media Type eld and press the Wheel (OK)
button on the Installer Remote to display the drop-down list of
options. Then use the Up/Down arrow keys to select either RF or
IP, as applicable.
Note: If the Media Type has already been set in the EZ-Manager
Wizard, the specied value will be reected in this eld.
(Continued on next page)
Network
Pro:Centric
Media Share
Pre-loaded
Apps
WAKE ON LAN
Network /
WOL (Wake Up Frame)
Disabled
WOL (Magic Packet)
Disabled
^
^