LG 65EV960H - Page 59

59
206-4322
IP Environment Setup (Cont.)
LG Connect
LG Connect allows guests to use LG webOS Connect apps to pair
the TV with a mobile device, which can then be used to access and
control TV features (i.e., the device may be used as a mobile remote).
LG Connect requires that both the TV and the mobile device be on
the same Wi-Fi network.
This menu enables you to turn LG Connect either ON (default) or OFF.
It also allows you to delete all existing stored device pairings.
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select LG Connect. Then, press the Wheel
(OK) button.
2. When you initially access the LG Connect screen, the OFF/ON
toggle button at the top right of the screen is selected/highlighted by
default. Press the Wheel (OK) button on the Installer Remote to
turn LG Connect ON.
3. If you wish to delete all stored device pairings, turn LG Connect
ON as described in the previous step (if it is not ON already),
select/highlight the REVOKE PAIRING button, and press the Wheel
(OK) button on the Installer Remote. At the prompt for conrmation,
either select YES and press OK to delete the list of paired devices,
or select NO and press OK to return to the LG Connect Menu
without deleting stored pairings.
Note: See “Conguring a Wi-Fi Network Connection” on the previous
page for information conguring the wireless network connection.
Note: The REVOKE PAIRING button is only available/displayed when
LG Connect is turned ON.
IP Stream Control
If necessary, due to an audio and/or video stream delay, IP Stream
Control options enable you to compensate for synchronization
irregularities by allowing audio PTS and video PTS offset modications.
This menu also enables you to specify the IGMP version (2 or 3). Note
that any modications to these settings should be performed by
qualied personnel only.
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select IP Stream Control. Then, press the
Wheel (OK) button.
2. In the IP Stream Control screen, use the Up/Down arrow keys on
the Installer Remote to select/highlight the appropriate eld—Audio
PTS Offset, Video PTS Offset, or IGMP Version—and then press
the Wheel (OK) button.
3. If you are modifying an offset value, use the Left/Right arrow keys
to select the appropriate value for the selected eld. Offset values
represent offset time in milliseconds (ms) and can be adjusted
from -500 ms to +500 ms in 10 ms increments. When you are
done, press the Wheel (OK) button on the Installer Remote.
Network
Pro:Centric
Media Share
Pre-loaded
Apps
IP STREAM...
Network /
Audio PTS Oset
0
Video PTS Oset
0
IGMP
2
^
^
^
Network
Pro:Centric
Media Share
Pre-loaded
Apps
LG CONNECT
Network /
LG Connect provides apps, like photo sharing
or mobile-device remotes, with the ability to
access and control certain features of your LG
TV. If you turn on LG Connect, you will still be
able to accept or deny requests from individual
apps trying to connect.
ON
REVOKE PAIRING
(Continued on next page)