LG 65EV960H - References; Updating TV;PTC Software Using a USB Memory Device

66
206-4322
Reference: Updating TV/PTC Software using a USB Memory Device
This section describes how to update TV (CPU) and/or PTC software using the TV Manager
“Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also
use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 26
to 29 for further information.
Before You Begin
• Software update les must be stored in a folder named “LG_DTV” in the root directory of the
USB memory device.
• Ensure the USB device has been formatted with FAT format.
Update the TV/PTC Software
Note: You can check the TV/PTC software versions by accessing the Installer Menu with the
Installer Remote. See “Accessing the Installer Menu” on page 30 for further information. PTC and
CPU versions are displayed in the Installer Menu footer.
Note for TV CPU Software Update only: If the TV detects a software le on the USB device, it
will automatically display an Update TV Software screen, and if the le contains a later version of
software than is currently running on the TV, you can start the software update from this screen
(select UPDATE and press the Wheel [OK] button). Otherwise, you can exit the screen (select
CANCEL and press the Wheel [OK] button), and access the TV Manager as described below.
1. Turn ON the TV, and then insert the USB memory device into either of the USB ports on the TV.
2. Press the button on the Installer Remote to display the TV setup menus (TV is in Pass-
through Mode) or the Function Menu (TV is not in Pass-through Mode).
3. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the
screen, select the All Settings menu icon and press the Wheel (OK) button to access the
advanced TV setup menus.
4. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number “7”
key a total of seven times to access the TV Manager.
Select the file(s) to download, and then select UPDATE below.
Update TV Software
EV960H_CPU_SW.epk
Update PTC Software
EV960H_PTC_SW.txt
Import Clone File
EV960H_IM.tlx
X
USBDEVICE
TV MANAGER
Ez Download
USB 1: Device Name
Ez Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Current TV Software Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
(Continued on next page)