33
206-4322
Installer Menu (Cont.)
Installer Menu Items 071 through 122
Item Function Value Range Default Value Brief Description of Function
071 BCK. CH-TIME 0 – 7 2 Chooses custom background color for MPI display characters.
073 CH NOT AVBLE 0 / 1 0
If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT
AVAILABLE” message is displayed if the user attempts to direct tune a channel
that is not included in the channel lineup.
075 REVERT CH 0 / 1 0
If set to 1 and loss of MPI communication occurs, the TV tunes to the
Start Channel.
078 UPN MSB 0 – 255 0 User programmable number, most significant byte.
079 UPN MSB-1 0 – 255 0 User programmable number, most significant byte - 1.
080 UPN MSB-2 0 – 255 0 User programmable number, most significant byte - 2.
081 UPN LSB 0 – 255 0 User programmable number, least significant byte.
082 CHKSM ERROR 0 / 1 1 Enforces rigid MPI checksum.
083 HANDSHK TIME 0 – 5 5 Relaxes MPI timing to be compatible with PC-based Windows-controlled systems.
084 PERMANENT BLK 0 / 1 0
Set to 1 to remove the blocking hours setting in the Function Menu for Parental
Control and make the block permanent.
086 V. MUTE TIME 0 – 50 0 Use to extend the normal video mute time during channel change.
088 EN NOISE MUTE 0 / 1 1 (Analog channels only) If set to 1, audio is muted if no signal is present.
090 KEY LOCK 0 / 1 0
If set to 1, all display panel joystick button functions are locked. IR is
still functional.
091 HDMI2 ENABLE 0 – 2 1
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
094 SAP MENU EN 0 / 1 1 Set to 1 to enable the SAP feature in the Function Menu.
096 DEF. ASP. RATIO 0 – 4 2 Selects the default aspect ratio. See detailed descriptions.
097 AUDIO OUTPUT 0 – 9
7
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
098 PRO:CENTRIC 0 – 3
0
Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for
GEM (Java Application) Mode. Set to 3 for HTML Mode.
099 BACK LIGHTING 1 – 202, 255 255 Sets the level of the TV picture back lighting. See detailed descriptions.
101 IR FEEDBACK 0 / 2 0 Set to 2 to disable the TV’s MMR feature.
102 ATSC BAND 0 – 4 4
Selects the RF band used by the ATSC tuner. See detailed descriptions.
103 ATSC TUNE MODE 0 / 1 1
Set to 1 for Physical Channel tuning. Set to 0 for Virtual Channel tuning.
104 START MINOR CH 0 – 255 0
Selects the Minor Start Channel number. Set to 0 for analog (NTSC) channel.
106 ASP RATIO LOCK 0 / 1 0
Set to 0 to use the default aspect ratio each time the TV is turned ON. Set to 1
to retain the aspect ratio set before the TV was turned OFF.
107 BANNER SELECT 0 / 1 1 Selects the type of banner to display during channel change.
116 VIDEO MUTE EN 0 / 1 0
(Analog channels only) If set to 1, video mutes (blank screen) when no signal
is present.
117 FACT DEFAULT 0 / 1 0 Set to 1 to restore the factory default settings of all Installer Menu items.
119 DATA CHANNEL
0 – 135, 253,
255
255
Set to 0 to disable. Set from 1 to 135 to match the RF channel number used by
the Pro:Centric server as its data channel. Set to 255 to use Auto Search to find
the Pro:Centric RF channel. See detailed descriptions.
121 UPDATE TIME HR 0 – 23, 128, 255 128 Sets the Wake For Update hour. See detailed descriptions.
122 UPDATE TIME MN 0 – 59, 255 0 Sets the minute for Wake For Update. See detailed descriptions.
To Next Page
Loading...
