LG 65EV960H - Page 44

44
206-4322
Cloning Procedures (Cont.)
(Continued from previous page)
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also, note that Diagnostics is for service use only.
Select the file(s) to download, and then select UPDATE below.
Update TV Software
EV960H_CPU_SW.epk
Update PTC Software
EV960H_PTC_SW.txt
Import Clone File
EV960H_IM.tlx
X
USBDEVICE
TV MANAGER
Ez Download
USB 1: Device Name
Ez Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Current TV Software Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
6. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device on which you wish to save the Clone le. If necessary, use the arrow keys on
the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the
screen and press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the
appropriate USB device from the pop-up list of USB devices.
USB Device
USB 1: Device 1
USB 2: Device 2
7. To gain access to the “Export Clone File” option in the TV Manager, key in the following number
sequence on the Installer Remote: 9-8-7-6.
8. Use the Up/Down arrow keys to select Export Clone File, and then press the Wheel (OK)
button.
Clone lename parameters will be displayed on the screen (see example on following page).
9. Modify the lename, as required. While the TV model element of the lename may not be
changed, you can differentiate this Clone le from other EV960H Clone les by changing
the numeric assignment appended to the end of the lename. Select/highlight the lename,
and then use the Up/Down arrow keys on the Installer Remote to scroll through numeric
assignments until the desired number is shown.
10. When you are ready to continue, i.e., when you have selected the desired lename, press the
Wheel (OK) button on the Installer Remote to select/activate the EXPORT button at the bottom of
the screen, and then press the Wheel (OK) button on the Installer Remote once more to export
the le.
(Continued on next page)