LG 65EV960H - Page 46

46
206-4322
Cloning Procedures (Cont.)
(Continued from previous page)
• If the EZ-Manager Wizard appears on the screen when you turn ON the Target TV, you can
use the wizard’s “USB Conguration” option to access the TV Manager and complete the import
procedure (see “TV Conguration Options” and/or “USB Conguration” on pages 18 and 24,
respectively, as necessary).
• You may also use the Ez Download utility to import the Clone/Conguration (.tlx) le. See “Ez
Download Utility” on pages 26 to 29 for further information.
• If the Target TV is currently in Pass-through Mode and you intend to use the TV’s Zoning
feature(s)—i.e., the Clone/Conguration (.tlx) le you are importing contains an FTG Channel
Map and/or FTG prole(s) with TV Zone and/or Wi-Fi Zone assignments—make sure to set
the appropriate TV Zone # and/or Wi-Fi Zone # in the TV when directed to do so in the procedure
below. See Reference section, “Using the TV’s Zoning Features,” for further information.
• If you would like the Target TV(s) to remain in Pass-through Mode or Application Tuning Mode,
as applicable, after the Clone/Conguration (.tlx) le is imported, ensure the “.tlx” le does not
contain an FTG Channel Map; otherwise, the import procedure will result in the Target TV(s)
being congured for FTG Mode.
• If a Clone (.tlx) le (exported Master TV Setup) contains an FTG Channel Map, the physical RF
channels in the FTG Channel Map have been assigned logical channel numbers (see “Exporting
a Clone File” above). When you import the Clone le with the FTG Channel Map on the Target
TV(s), you will have the option to select either logical or physical channel tuning. Even if you
select physical channel tuning, the (list of) physical RF channels in the FTG Channel Map will
remain in logical order.
• If an FTG Conguration (.tlx) le (created in the Cloud Configuration Tool) contains an FTG
Channel Map, each logical channel number in the FTG Channel Map has been assigned a
physical RF channel, an IP channel, or an Aux input (the latter designated by 130-0 through
137-0—see also Reference section, “TV Aux Input Conguration”).
Note: If the FTG Channel Map includes RF channels and Aux inputs only, when you import
the FTG Conguration le on the Target TV(s), you will have the option to select either logical or
physical channel tuning. If you select physical channel tuning, the physical RF channels and
Aux inputs in the FTG Channel Map will remain in logical order. Physical channel tuning is not
available when the FTG Channel Map includes IP channels.
• If the Clone/Conguration (.tlx) le was edited/created in the Cloud Configuration Tool, it may
contain multiple zoned FTG Installer Menu proles for different TV models. Make sure it includes
the appropriate Installer Menu prole(s) for the Target TV(s) before performing the procedure
below.
Caution: Do not unplug the TV power cord or remove the USB memory device while
importing is in progress, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Import Clone File Procedure
1. Turn ON the Target TV.
(Continued on next page)