LG 65EV960H - Page 52

52
206-4322
Cloud Conguration Tool Overview (Cont.)
(Continued from previous page)
3. If you need to edit the FTG Channel Map from an existing le (see previous step) or create a new FTG
Channel Map, click on CHANNEL MAP in the menu options bar at the top left of the page to access
the Channel Map web page (see example on page 54), and edit/create the FTG Channel Map. Up to
600 logical channels—combined total of both RF and IP mapped channels—can be defined in the FTG
Channel Map.
4. (Optional) To load default FTG Installer Menu settings by model, click on INSTALLER MENU in the
menu options bar at the top left of the page to access the Installer Menu web page (see example on
page 55), select the desired model/chassis ID and the desired Zone, and then click on the CREATE
PROFILE button to create a new prole.
The new model prole will be added to the Installer Menu Prole List at the top right of the page, and
the Installer Menu items for the selected model will now be displayed on the lower half of the page.
The Summary tab shows the features that are available for configuration. Click on any Installer Menu
item in the Summary tab or a category (User, Tuning, Audio, etc.) tab to view and/or edit its parameters,
as required.
Note: Unless you select a different Zone assignment when you create the new prole, the default
Zone 0 is assigned automatically. See Reference section, “Using the TV’s Zoning Features,” for further
information on the TV Zoning feature and setting the TV Zone # in the TV(s).
5. Click on FILE MANAGER in the menu options bar at the top left of the page to return to the File
Manager web page. The FTG Conguration List will now be populated with summaries of the FTG
Channel Map, FTG Installler Menu prole(s), and, if applicable, Setup Menu prole(s) you created or
added in the previous steps. Review and edit the FTG Conguration List, as necessary.
Note: If you need to edit the Channel Map or an Installer Menu profile, double-click on the desired
item to access the Channel Map page or the Installer Menu page, as applicable. When you return
to the File Manager page, the FTG Conguration List is automatically updated with all Channel Map
and Installer Menu changes. (Installer Menu and/or Setup Menu profile Zone assignments may be
changed on the File Manager page.)
Note: To remove an individual item from the FTG Conguration List, click on the at the right of the
applicable item. At the prompt for conrmation , either click yes to conrm and remove the
item immediately, or click no to retain the item. To clear all current FTG Conguration List contents, click
on the CLEAR LIST button at the bottom right of the FTG Conguration List.
6. Export the FTG Conguration List contents to an FTG Conguration (.tlx) le on the PC’s hard drive for
later use:
• Type a brief descriptive name in the File Name eld at the bottom of the FTG Conguration List
(avoid using special characters, such as ?, &, @, etc.).
• Click on EXPORT FILE.
• In the Save As window (if applicable—see note below), select the desired location to which to export
the le (you can also edit the le name here, if necessary), and click Save.
Note: Depending on the browser you are using and its current settings, les may automatically be
saved to the “Downloads” or another designated folder on your PC. If you want to be able to select the
folder in which to save the FTG Conguration le, check your browser settings.
7. Transfer the FTG Conguration (.tlx) le to a USB memory device, and proceed to “Importing a Clone
File” on pages 45 to 49 to transfer the FTG Conguration le to an EV960H TV.