80
206-4322
(Continued from previous page)
2. Use the Left/Right arrow keys on the Installer Remote to select Wi-Fi Service, and then press the
Wheel (OK) button.
Note: If a message is displayed indicating that Wi-Fi service is not currently available, make sure a
wired LAN connection to the TV has been established.
3. When you initially access the Wi-Fi Service screen, the OFF/ON toggle button at the top right of the
screen is selected/highlighted by default. If Wi-Fi Service is currently OFF, press the Wheel (OK)
button on the Installer Remote to turn Wi-Fi Service ON. When Wi-Fi Service is ON, the Wi-Fi Service
access information, including the SSID and security key, is displayed in the lower half of the screen.
4. Make sure Wi-Fi is turned ON on your device, and then use the access information provided to initiate a
connection to the TV’s network.
Once a device is connected successfully to the TV’s network, you can use it to access the Internet. Up to
ve devices may be connected at a time.
Note: A wired network connection MUST be established in order for guests to use SoftAP/Wi-Fi Service.
Also, the SoftAP/Wi-Fi Service feature may only be used while the TV is turned ON.
Note: If the Wi-Fi frequency is not automatically detected, set the frequency in the device(s) to 2.4 GHz.
Reference: Using Media Share Features (Cont.)
To Next Page
Loading...
