LG 65UW660H - Page 21

21
206-4297
EZ-Manager Wizard (Cont.)
USB Conguration via EZ-Manager Wizard
With either the TV Conguration Options or the Zones, Label, and Room Number screen on display,
proceed as follows to congure the TV using the USB memory device.
1. Insert the USB memory device with the appropriate le(s) into either of the TV’s USB ports.
2. Use the arrow keys on the Installer Remote to select USB CONFIGURATION, and then press
OK.
You will be redirected to the TV Manager / USB download options.
Select the file(s) to download, and then select UPDATE below.
Logo Image Download
Splash Image ProC.jpg
Insert Background Image(s)
None
Update TV Software
UW660H_CPU_SW.epk
Update PTC Software
UW660H_PTC_SW.txt
Import Clone File
UW660H_IM.tlx
<
>
X
USBDEVICE
TV MANAGER
Ez Download
USB 1: Device Name
Ez Download
Logo Image Download
Insert Background Image(s)
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Image1 .jpg Image2.jpg Image3.jpg
Image4 .jpg Image5.jpg Image6.jpg
Image7 .jpg Image8.jpg Image9.jpg
Note: You can select the
X
button at the top right corner of the screen and press OK on the
Installer Remote at any time to return to the EZ-Manager Wizard.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
3. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the le(s) you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the USB DEVICE button at the top right of the screen and
press OK. Then, use the Up/Down arrow keys to select the appropriate USB device from the
pop-up list of USB devices displayed at the top of the screen.
4. Select the appropriate option from the TV Manager, and initiate the desired download(s).
Update progress will be displayed on the screen. Do NOT remove the USB device while
updates are in progress. When the update process is complete, the TV will reboot. Upon restart,
depending on the type of update(s) completed, either the EZ-Manager TV Configuration Options
screen will be redisplayed (software and/or image updates only) or the TV will tune according
to the Start Channel setting in the Installer Menu (TV configured with Clone/Configuration file).
Note: If the TV Configuration Options screen is redisplayed (software and/or image updates
only), you can either proceed with configuration via the EZ-Manager Wizard or exit the EZ-
Manager Wizard, as required.
5. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the TV.