LG 65UW660H - Ez Download Utility; Before You Begin; Accessing and Using the Ez Download Utility

22
206-4297
Ez Download Utility
The Ez Download utility, available from the TV Manager, enables you to select multiple les at one
time from the les loaded on a USB memory device. You may use this utility to download any one
or all of the following to a TV:
• One Clone or FTG Conguration (.tlx) le
• One TV CPU software update
• One PTC software update
• One splash screen image
• Up to 12 background images
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• Software update, splash screen image, and background image les must be stored in a folder
named “LG_DTV” in the root directory of the USB memory device. Clone/Conguration (.tlx)
les should simply be stored in the root directory of the USB device.
• If the EZ-Manager Wizard appears on the screen when you turn ON the TV, you can use the
wizard’s “USB Conguration” option to access the Ez Download utility (see “TV Conguration
Options” and/or “USB Conguration” on pages 14 and 20, respectively, as necessary).
• If the TV is currently in Pass-through Mode and you intend to use the Zoning feature(s) on this
TV for location-specic conguration purposes, make sure to assign the appropriate TV Zone #
and/or Wi-Fi Zone # in the TV when directed to do so in the procedure below.
• When creating les to be downloaded, avoid using special characters (?, &, @, etc.) in lenames.
• Refer to “Custom Master TV Setup” on pages 36 to 38 for information on creating a Clone (.tlx)
file, and/or refer to “Creating an FTG Conguration File” on pages 45 to 46 for information on
creating an FTG Conguration (.tlx) le for FTG Mode conguration.
• See Reference section, “Downloading a Splash Screen Image using a USB Memory Device,”
for splash screen image guidelines.
• See Reference section, “Downloading Background Images using a USB Memory Device,”
for background image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
Caution: Do not unplug the TV power cord or remove the USB memory device
during a data download, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Accessing and Using the Ez Download Utility
1. If it is not ON already, turn ON the TV.
2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you
turn ON the TV:
(Continued on next page)