LG 65UW660H - FTG File Manager Utilities Overview

46
206-4297
(Continued from previous page)
3. To add an FTG Channel Map to the FTG Conguration List, click under FTG Channel Map. This
will copy the current mapped RF and IP channels to the FTG Conguration List.
Note: If you make any change(s) in the FTG Channel Map Conguration Utility to the current data to
be included in the FTG Conguration List, you will need to recopy the FTG Channel Map to the FTG
Conguration List.
4. (Optional) Load default FTG Installer Menu settings for the TV. In the Installer Menu Templates section of
the FTG File Manager main screen:
• If it is not already selected, click the down arrow at the right of the Region eld, and select North
America. Then, click the down arrow at the right of the Chassis eld, and select the appropriate
chassis from the drop-down list of available models.
• Click the Load button.
• Use the FTG Installer Menu Conguration Utility to modify settings, if necessary, including Media
Share settings, Wi-Fi Zoning settings, etc. Then, return to the FTG File Manager main screen.
5. If you wish to change the Zone assignment for the current FTG Installer Menu settings, click on the
down arrow at the right of the Zone eld (below the FTG Installer Menu Settings eld), and select the
appropriate Zone (0–8).
Note: See Reference section, “Using the TV’s Zoning Features,” for further information on the TV
Zoning feature and setting the TV Zone # in the TV(s).
6. To add FTG Installer Menu settings to the FTG Configuration List, click under FTG Installer Menu
Settings. This will copy the selected model settings to the FTG Conguration List.
Note: If you make any change(s) in the FTG Installer Menu Configuration Utility to the current data to
be included in the FTG Configuration List, you will need to recopy the FTG Installer Menu settings to
the FTG Configuration List.
Note: Above both the FTG Conguration List and TV Setup Menu List windows, an Edit Zone eld
enables you to change the Zone assignment for each UW660H Installer Menu and/or TV Setup Menu
prole, if desired. Select/highlight the desired prole, and then click on the down arrow at the right of
the applicable Edit Zone eld to select the appropriate Zone.
7. Click the Save button in the List command section of the FTG File Manager main screen to save the
FTG Conguration List and, if present, TV Setup Menu List contents to an FTG Conguration (.tlx) le
on the PC’s hard drive for later use.
In the Save As pop-up window, name the le (avoid using special characters, such as ?, &, @, etc.)
and click Save. The default folder path is C:\Program Files\Zenith\FTG\TLX. Note that the FTG
Conguration le will have a “.tlx” le extension.
Note: To remove an individual item from the FTG Conguration List or the TV Setup Menu List before
saving the new le, click on/highlight the item to be removed, and then click the Remove Item button
directly above the applicable window. To clear both the current FTG Conguration List and TV Setup
Menu List contents, click the Clear button in the List command section of the FTG File Manager main
screen.
8. Transfer the FTG Conguration (.tlx) le to a USB memory device, and proceed to “Importing a Clone
File” on pages 41 to 44 to transfer the FTG Conguration le to an UW660H TV.
FTG File Manager Utilities Overview