LG 65UW660H - UW660 H Rear and Side Jack Panels

81
206-4297
SPEAKER OUT
LINE OUT
PTC SERVICE
(SERVICE ONLY)
RJP
Use
Only
MPI
AV IN/
AUDIO IN (DVI)
ANTENNA /
CABLE IN
LAN
OPTICAL
DIGITAL
AUDIO OUT
USB IN 1
RESET
UPDATE
IN 1
SERVICE
L/MONO-AUDIO-R
RS-232C IN
(CONTROL)
Reference: UW660H Rear and Side Jack Panels
AV IN/AUDIO IN (DVI)
Connect composite video and/or
L & R analog audio output from
external device.
UPDATE
Restricted to software updates.
RESET
Initiates a hardware reset and turns the TV OFF.
MPI
When the TV is in Pass-through
Mode, the MPI function enables
an external MPI control device
(i.e., VOD/PPV STB, etc.) to
control the TV.
SPEAKER OUT / LINE OUT
(3.5 mm jack) Connect external audio (xed speaker,
variable speaker, or xed line level [amplier])
equipment. See Reference section, “External Stereo
Speaker Specifications,” for further information.
RS-232C IN (CONTROL)
Typically used for downloading
software updates, etc.
RJP Use Only
Connection for Remote Jack Pack (RJP)
Control cable.
HDMI IN 1
Connection for HDMI output from external device.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
PTC SERVICE (SERVICE ONLY)
Restricted to service updates.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater
systems. Note: When the TV is OFF,
this port is not enabled.
LAN
Use for video IP and/or network connections.
USB IN 1
Insert USB memory device for software updates,
cloning purposes, FTG Mode configuration, picture/
music entertainment, etc., as applicable.
Side Jack Panel
USB IN
32
(
ARC
)
2
IN
USB IN 2
Insert USB memory device for
software updates, cloning
purposes, FTG Mode configuration,
picture/music entertainment, etc.,
as applicable.
HDMI IN 2 & 3
Connection for HDMI output
from external device.
Caution: Do NOT connect a standard
Ethernet cable to the RJP port, as this may
damage the TV and network equipment.
SERVICE
Typically used for downloading software
updates, etc.