LG 65UW660H - Page 24

24
206-4297
Ez Download Utility (Cont.)
(Continued from previous page)
6. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the le(s) you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the USB DEVICE button at the top right of the screen and
press OK. Then, use the Up/Down arrow keys to select the appropriate USB device from the
pop-up list of USB devices displayed at the top of the screen.
USB Device
USB 1: Device 1
USB 2: Device 2
7. If it is not currently selected, use the arrow keys to select Ez Download, and then press OK.
As illustrated in the example on the previous page, when Ez Download is selected, a list of
les/le types is displayed on the screen. Remember that Logo (i.e., Splash Screen) Image,
Background Image, TV Software (CPU), and PTC Software les must be stored in the LG_DTV
folder and Clone/Conguration (.tlx) les must be stored in the root directory on the USB
device.
Note: Press on the Installer Remote or select the
X
button in the top right corner of the
screen to exit the TV Manager (if accessed from the TV menus, you may also press EXIT on
the Installer Remote to exit). If you accessed the TV Manager via the EZ-Manager Wizard,
you will be returned to the last screen on display before you selected the “USB Conguration”
option. If you accessed the TV Manager via the TV menus, you will be returned to program
viewing.
8. To select a le:
• Use the arrow keys on the Installer Remote to select/highlight the appropriate le type eld,
and then press OK. A list of available les will be displayed to the right of the le type elds.
• Then, use the arrow keys to select the desired le.
Note: The utility will only allow you to select one of each le type for downloading. For example,
if there are two les in the Ez Download “Import Clone File” list, you can only select one or the
other of those two les.
Note: The initial default value for each le type is “None.” After the Ez Download utility is run,
a le is automatically created and stored on the USB device that was used. The le, which
will have a “.dzm” le extension, maintains a history of the le(s) previously used with the Ez
Download utility. The next time(s) you use this USB device with the Ez Download utility, the
le(s) selected for the last download will be pre-selected for the current download, thus
facilitating the process of conguring additional TVs of this model using the same USB device.
Note: The current TV software (CPU) or PTC software version is always displayed above the
listing of available TV software and PTC software les, respectively. Ensure the software version
of the selected le is the correct version before applying the update to this TV.
(Continued on next page)