A18
Low Radiation Compliance (MPR II)
This monitor meets one of the strictest guidelines available today for
low radiation emissions, offering the user extra shielding and an
antistatic screen coating. These guidelines, set forth by a government
agency in Sweden, limit the amount of emission allowed in the
Extremely Low Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
Self Diagnostics
This monitor can sense when there is a
possible problem present, and informs you of
this condition by presenting you with a SELF
DIAGNOSTICS OSD. This OSD may pop up
when it is On but no signal is detected. In this case the message
CHECK SIGNAL CABLE will be high lighted, alerting you to check
the signal cable connections.
DDC (Display Data Channel)
DDC is a communication channel over which the monitor automatically
informs the host system (PC) about its capabilities. This monitor has
two DDC function; DDC1 and DDC2B. DDC1 and DDC2B carry out
uni-directional communication between the PC and the monitor. Under
these situations, the PC sends display data to the monitor but not
commands to control the monitor settings.
Note : PC must support DDC functions to do this.
If your monitor is displaying a mono chrome image or the wrong resolution, select the
DDC OFF function.
To Next Page
Loading...
