Getting Started2
Getting Started
1
IMPORTANT SAFETY INSTRUCTIONS
General safety instructions
This manual contains important instructions for the installation and maintenance of the LG
Electronics ESS inverter.
LG Electronics ESS inverters are designed and tested to meet all applicable North American
and International safety standards. However, like all electrical and electronic equipment, safety
precautions must be observed and followed during installation and operation of the LG Electronics
ESS inverters to reduce the risk of personal injury and to ensure a safe installation.
Installation, commissioning, service, and maintenance of LG Electronics ESS inverters must only
be performed by qualied personnel who are licensed and/or satisfy state and local jurisdiction
regulations.
Before starting installation or commissioning of the LG Electronics ESS models, read through the
entire manual and note all precautionary statements.
All US electrical installations must comply and be in accordance with all state, local and utility
regulations, and National Electrical Code ANSI/NFPA 70.
Installations in Canada, must be done in accordance with applicable Canadian standards.
Safety symbols and terminology
DANGER
DANGER indicates a hazardous situation which will result in
death or serious injury if not avoided.
WARNING
WARNING indicates a hazardous situation which could result
in death or serious injury if not avoided.
CAUTION
CAUTION indicates a hazardous situation which could result
in minor or moderate injury if not avoided.
NOTICE
NOTICE indicates a situation that can result in property
damage if not avoided.
INFO
INFORMATION indicates a note of important information
that will ensure optimal operation of the system.
HIGH VOLTAGE WARNING! Indicates hazardous high voltages are present which
will result in death or serious injury if not avoided. Thus, only authorized and
trained personnel should install and/or maintain this product.
Getting Started
To Next Page
Loading...
