To Next Page

To Previous Page

- 134 -

Only for training and service purposes

LGE Internal Use Only

Disassembly of the parts

• Unhook the tab on the right inside of the chassis

at the same time, slightly pull the evaporator

toward you until the tab is clear of the slot.

5) To remove the Motor Cover

• Remove 2 securing screw.

• Pull the motor cover out from the chassis

carefully.

6) To remove the Cross-Flow Fan

• Loosen the screw securing the cross-flow fan to

the fan motor (do not remove).

• Lift up the right side of the cross-flow fan and the

fan motor, separate the fan motor from the

cross-flow fan.

• Remove the left end of the cross-flow fan from

the self-aligning bearing.

Motor cover

LG AMNH12GD4L0 Manuals

Other manuals for LG AMNH12GD4L0