PRODUCT INTRODUCTION
ENGLISH
11
Handling the remote control
- Aim at the signal receptor on the floor standing type air conditioner when operating.
- Block a strong light over the signal receptor with a curtain or etc. so as to prevent the abnormal
operation. (ex: electronic quick start, ELBA, inverter type fluorescent lamp)
- Be sure that there are no obstructions between the remote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to direct sunlight, or next to a heating
unit, or other heat source.
- The feature may be changed according to the type of model.
- Some functions may not be supported, depending on the model.
Control
panel
Description
Power ON/OFF button :Operation will start when this
button is pressed, and stop when the button is pressed
again.
Temperature setting button
Indoor fan speed button : To select the desired fan speed.
Cooling button
Heating button
Fan mode button
Air flow direction button(Up/down) :
Adjust air flow direction vertically.
Air flow direction button(Left/right) :
Adjust air flow direction horizontally.
ON/OFF timer setting button : Set the time of starting or
stopping
Artificial intelligence
Dehumidification button
Power cooling/heating mode button :
Powerful cooling/heating are performed within short time
Auto Air flow operation button : It is useless in this model
To Next Page
Loading...
