J
Jessica MorrisJul 29, 2025
What to do if the lamp door is open on my LG BS254 Projector?
- LLogan GreerJul 29, 2025
If the lamp door is open, disconnect the AC power cord and wait for one minute before restarting the LG Projector.
To Next PageTo Next PageWhat to do if the lamp door is open on my LG BS254 Projector?
If the lamp door is open, disconnect the AC power cord and wait for one minute before restarting the LG Projector.
What to do if my LG BS254 Projector shows a lamp error?
If your LG Projector is showing a lamp error, disconnect the AC power cord and wait for one minute before restarting the projector.
What to do if my LG BS254 Projector displays a DMD error?
If your LG Projector displays a DMD error, disconnect the AC power cord and wait one minute before restarting the projector.
What to do if my LG Projector displays a color wheel error?
If your LG Projector displays a color wheel error, disconnect the AC power cord and wait one minute before restarting the projector.
What to do if my LG BS254 Projector shows a Fan1 error?
In case of a Fan1 error on your LG Projector, disconnect the AC power cord and wait for one minute before restarting it.
What to do if my LG BS254 Projector shows a Fan3 error?
If your LG Projector displays a Fan3 error, disconnect the AC power cord and wait one minute before restarting the projector.
What to do if my LG BS254 Projector shows a Fan2 error?
General| Projection distance | 0.129 - 2 m |
|---|---|
| Projection technology | DLP |
| Contrast ratio (typical) | 2100:1 |
| Screen size compatibility | 51 \ |
| Projector native resolution | SVGA (800x600) |
| Resolution | 1280 x 1024 pixels |
| Aspect ratio | 4:3, 16:9 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 260.9 x 186.4 x 71.3 mm |
| Power requirements | 100-240V |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Focus | Manual |
| Focal length range | - mm |
| RMS rated power | 1.5 W |
| DVI port | No |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | - |
| Ethernet LAN (RJ-45) ports | 0 |
| Power consumption (standby) | - W |
| Power consumption (typical) | 205 W |
Weight and Dimensions| Weight | 1910 g |
|---|
Provides essential safety precautions for operating the projector.
Guidelines for safe handling and use of the power cord and supply.
Instructions and warnings related to replacing the projector lamp.
Procedures and cautions for cleaning the projector unit.
Detailed steps for safely replacing the projector lamp.
Tips for diagnosing and resolving common projector issues.
