Airing your room
(Air Circulation operation)
This mode only circulates the indoor air
without changing the room temperature. The
cooling lamp lights up in air circulation mode.
1 Press P to turn on the power.
2 Open the remote control cover.
3 Press to select the air circulation opera-
tion.
- is displayed on the display screen.
4 Press to adjust the fan speed.
Adjusting the fan speed
1 Press repeatedly to adjust the fan
speed.
- Select R if you want natural air.
The fan speed adjusts automatically.
Adjusting the air flow direc-
tion
1 Open the remote control cover while the
air conditioner is in operation.
2 To adjust the direction of the air flow hori-
zontally, press and the louvers wil
swing up & down automatically.
- To stop the louver at a desired angle,
press again.
3 To adjust the direction of the air flow verti-
cally, press and the louvers will swing
left & right automatically.
- To stop the louver at a desired angle,
press again.
Setting the timer
You can use the timer function to save energy
and to use the air conditioner more efficiently.
Setting the current time
1 Open the remote control cover and press
RESET.
2 Press P to turn on the power.
3 Press 2nd F button and check if icon is
on.
- The time icon flickers at the bottom of
the display screen.
NOTE
!
• Adjusting the air flow direction vertically
may not be supported, depending on
the model.
• Adjusting the air deflector arbitrarily may
cause product failure.
• If you restart the air conditioner, it starts
to operate with the previously set direc-
tion of air flow, so the air deflector may
not match the icon displayed on the re-
mote control. When this occurs, press
or to adjust the direction of the
air flow again.
11
BASIC FUNCTIONS
ENGLISH
To Next Page
Loading...
Need help?
General
