Operating14
Operating
3
Other Operations
Programmed Playback
The program function enables you to store your
favorite les from any disc or USB device.
A program can contain 20 tracks/ les.
1. Insert a CD or a USB and wait for it to be
ordered.
2. Press PROGRAM/MEMO on the remote control
in stop status.
3. Press
Cc
/
vV
to select a track/file.
4. Press PROGRAM/MEMO again to save.
5. Repeat steps 3-4 to select a next track/file.
6. Press
d
/
M
to play the programmed music
tracks/files.
7. To clear your selection, press
Z
on the remote
twice.
The programs are also cleared when the disc
or USB device is removed, the unit is powered
o or the function is switched to others.
,
Note
Displaying file information
(ID3 TAG)
While playing an MP3 le containing le
information, you can display the information by
pressing INFO.
Turn off the sound temporarily
Press
@
MUTE on the remote control to mute
your sound.
You can mute your sound, for example, to answer
the telephone, the mute symbol “
” is displayed in
the display window.
To cancel it, press
@
MUTE again or change the
volume level.
Auto Power Down
This unit will be o itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
CM1530-FP_AAUSLLK ENG 6426.indd 14CM1530-FP_AAUSLLK ENG 6426.indd 14 2013-06-04 10:24:062013-06-04 10:24:06
To Next Page
Loading...
Need help?
General
