Operating 15
Operating
3
Radio Operations
Listening to the radio
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning : Press TUN.-/+ on the remote
control or TUNING -/+ on the unit for about 2
seconds until the frequency indication starts
changing, then release. scanning stops when
the unit tunes in a station.
Manual tuning: Press TUN.-/+ on the remote
control or TUNING -/+ on the unit repeatedly.
3. Adjust the volume by using VOLUME
W
/
S
on
the remote control or rotate Volume knob on
the unit.
Improving poor FM reception
Press
d
/
M
on the remote control. This will change
the tuner from stereo to mono. Then the reception
will be better than before.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
2. Select the desired frequency by pressing
TUN.-/+ on the remote control or TUNING -/+
on the unit.
3. Press PROGRAM/MEMO. A preset number will
blink in the display window.
4. Press PRESET/FOLDER
W
/
S
to select the
preset number you want.
5. Press PROGRAM/MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET/FOLDER
W
/
S
.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMO for two
seconds. “ERASE” will blink in the display
window.
2. Press PROGRAM/MEMO to erase all saved radio
stations.
CM1530-FP_AAUSLLK ENG 6426.indd 15CM1530-FP_AAUSLLK ENG 6426.indd 15 2013-06-04 10:24:062013-06-04 10:24:06
To Next Page
Loading...
Need help?
General
