23
4
Press the Power button to activate the Normal
mode.
• To turn off the appliance, press the Power
button again.
CAUTION
• Running the appliance for a long period of time
with a tool connected may cause the motor to
overheat.
• This appliance has a built-in safety device
to prevent overheating. If the appliance
becomes overheated after extended use, it
may automatically turn off. If this occurs, leave
the appliance in a cool, well-ventilated area
for about an hour before turning on the power
again.
Adjusting the Suction Power
Adjust the suction power using the suction power
adjustment button on the handle.
• Press the power On/Off button a to turn the
appliance on or off.
• Normal Mode: Press the power On/Off button
a to activate the Normal mode.
• Power Mode: Press suction power up button b
to increase the suction power.
• Turbo Mode: Press and hold the suction power
up button b for more than 3 seconds.
• Press the suction power down button c to
decrease the suction power by a step.
• Press the suction power down button c to
switch the suction power from the Turbo →
Power → Normal.
• You cannot select Turbo mode directly from
Normal mode. You must switch to the Power
mode first. (Normal → Power → Turbo)
Adjusting the Suction Power with Mop
Nozzle
• Press the power On/Off button a to turn the
appliance on or off.
• Only Mopping Mode: Press the power On/Off
button a to activate the Only Mopping Mode.
• Normal Mode: Press suction power up button
b to increase the suction power.
• Power Mode: Press suction power up button b
to increase the suction power.
• Turbo Mode: Press and hold the suction power
up button b for more than 3 seconds.
• Press the suction power down button c to
decrease the suction power by a step.
• Press the suction power down button c to
switch the suction power from the Turbo →
Power → Normal → Only Mopping.
• You cannot select Turbo mode directly from
Normal mode. You must switch to the Power
mode first. (Only Mopping → Normal →
Power → Turbo)
To Next Page
Loading...
