31
• Using the Brush
To convert the tool from crevice to brush mode,
grab the sides of the brush head a and pull the
brush down.
− To convert back to the crevice mode, press in
on the brush release button b and slide the
brush up.
• Adjusting the Length
− To adjust the length of the tool, press and
hold the release button c on the side of the
tool. Pull or push on the brush head d to
extend or retract the extension tube.
Multi-angle Tool
This tool has a soft brush that can be adjusted to
a variety of angles, making it especially useful for
cleaning vehicle consoles or the tops of furniture.
Flexible Hose Extension
Connect this flexible, extendable hose between the
product body and the tools to clean hard to reach
areas.
• The flexible hose extension cannot be used
with the Power Drive Nozzle.
CAUTION
• Do not use the appliance for any purpose other
than domestic household cleaning.
• Keep fingers away from pinch points when
assembling the appliance or the charging
station.
• Using the appliance for a long time with a tool
connected may overheat the motor.
• If any foreign object is sucked into the inlet
during cleaning, the appliance might stop in
order to prevent damage to the product body
or motor. Immediately stop using the appliance
and remove the foreign object before resuming
cleaning.
• Do not use tools to clean a TV, monitor or LCD
display as they may scratch these surfaces.
To Next Page
Loading...
Need help?
General
