34
4
Clean the exhaust filter by brushing the dust
off or by washing it in running water.
• To avoid odor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
5
Clean the pre-filter by brushing the dust off or
by washing it in running water.
• As a spare pre-filter is provided for
your convenience, use two pre-filters
alternatively if necessary.
• To avoid odor, allow the pre-filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6
Insert the clean, dry pre-filter and rotate the
exhaust filter to the locked position e to
reassemble it on the product body.
CAUTION
• Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.
Cleaning the Power Drive Carpet
Nozzle/Power Drive Floor Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
1
Press the nozzle release button a to remove
the nozzle from the extension pipe or product
body.
2
Turn the nozzle upside down and rotate the
cover lock slot b counterclockwise.
3
Pull the brush cover forward and pull the brush
out.
To Next Page
Loading...
