6
• Avoid operating the appliance in areas where there is a risk of leakage of
flammable gas, industrial oil or metallic dust.
• Do not store or install the appliance, power cord or plug near heating
devices or open flames.
• Install the charging station on a firm, level surface.
• To prevent tipping, floor standing mode installations should be anchored
to the wall using the provided stand anchoring screw, anchoring block
and double-sided tape.
• In wall-mounted mode installations, the charging station should be
secured tightly to the wall using the provided wall anchoring screws.
• Use the anchoring screws only when attaching to concrete or similar solid
surfaces.
• Never drill into a wall without first checking that the area behind it is free
from power conduits, plumbing, vents, or cables.
• Do not use or store the appliance at temperatures below 5 °C or above
38 °C.
• Do not store or install the appliance where it is exposed to temperatures
below freezing or exposed to outdoor weather conditions.
• When installing or moving the appliance, be careful not to pinch, crush, or
damage the power cord or plug.
Operation
• Read all instructions before using the appliance, and save these
instructions.
• Use only as described in this manual. Use only manufacturer’s
recommended attachment.
• This appliance is designed for normal indoor domestic use only. It is not
to be used for any non-residential, commercial, or industrial application.
• Do not use or store the appliance in any outdoor location, garage
environment or on wet surface.
• This product should only be used with a 100 V - 240 V~ 50/60 Hz. Make
sure to check the power specifications of the place where you intend to
use the appliance.
• Do not handle the power cord, plug, or appliance controls with wet hands.
To Next Page
Loading...
