- 10 -
Process Indicator
• Indicates current program phase.
• The Wash, Rinse and Dry lamps twinkle while each phase of washing process.
• The Clean lamp turns on after all procedure is ended for 4minutes.
Salt & Rinse Refill Indicator
• Salt : Refill with special salt when the lamp turns on.
• Rinse : Refill with rinse aid when the lamp turns on.
Half Load
• In case of small load, use upper or lower rack only to save energy.
• With each press, can select Upper or Lower rack only.
• In case you don’t select this button, the machine always works vario washing, which operate upper and lower spray arm
alternately.
Child Lock & Extra Hot Indicator
• Lamp will turn on when the Child Lock setting is on.
• Lamp will turn on when the Extra Hot setting is on.
D1418,D1419 only
Time Left
• Before starting, the display window shows the running time of the selected program.
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed.
“OE”, “FE”, “IE”, “EI”, “HE”, “CE”, “LE”, “tE”
• If this error letters are displayed, please refer to the trouble shooting guide page 26 and follow the guide.
Delay Start
• If you want to delay the start of selected program, press this button.
• Pressing this button will increase time by 1 hour.
• The delay start time can be adjusted from 1 hour to 19 hours.
Program
• Press the cycle that corresponds to your desired wash cycle.
Extra Hot ( D1418,D1419 only)
• If you select the Extra Hot function, the operating temperature will be up to 80ºC.
(Dual Intensity, Auto, Eco)
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the Eco and Gentle button simultaneously for a few seconds. Then, a “On”
will appear in the display.
Child Lock
• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.
• To activate or release the Child Lock function, press the Gentle and Quick buttons simultaneously for a few seconds while
the dishwasher is in operation.
• All controls will be disabled except the Child Lock and Power buttons.
• Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you can operate
the dishwasher.
Power
• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
To Next Page
Loading...
Need help?
General
