Connecting Gas Dryers (cont.)
w
WARNING
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic
precautions, including the following:
Failure to do so can result in fire, explosion,
or death.
Failure to do so
can result in fire, explosion, or death.
Failure to do so can result in fire,
explosion, or death.
Failure to do so can result in fire,
explosion, or death.
Failure to do so can
result in fire, explosion, or death.
. Failure to do so can result in
fire, explosion, or death.
Failure to
do so can result in fire, explosion, or death.
Connecting the gas supply
turned OFF. Confirm that the type of gas available in
your laundry room is appropriate for the dryer. The
dryer is prepared for Natural Gas with a
⁄₈ - inch NPT
gas connection.
the threads of the gas connector when removing the
shipping cap.
using a new flexible stainless steel connector with a
⁄₈
- inch NPT fitting.
dryer and your laundry room’s gas supply. Turn on
your laundry room’s gas supply and check all pipe
with a noncorrosive leak-detection fluid.
Electrical connection
High-altitude installations
If your gas dryer is being installed at an elevation above
or gas supplier.
Plug dryer into a
outlet.
Gas Supply
Connection
Plug
AGA/CSA-Certified
Stainless Steel Flexible
Connector
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
Need help?
General
