Custom program
If you have a special combination of settings that you
use frequently, you can save these settings as a CUSTOM
PROGRAM.
To Save a Custom Program:
select the desired cycle.
that cycle.
would like to add. A confirmation message will be
shown in the display.
seconds.
To Recall a Custom Program:
Steam functions
To Fill the Steam Feeder
drawer until it clicks into place.
w
WARNING
Failure to follow this warning
can cause serious injury or death.
Failure to
follow this warning can cause serious injury or death.
NOTE
You may save only one custom program at a time.
Pressing and holding the CUSTOM PROGRAM button
will overwrite any previously saved custom program.
NOTE
be filled with water up to the MAX line. If not, the will
be displayed. Make sure that the steam feeder is filled
with water or the drawer is fully closed. Turn the dryer
off then restart the Steam Cycle.
foreign substances, rinse agents, or detergents.
is empty.
the steam generator will not work.
will be overflow.
and the drawer before starting the dryer.
HOW TO USE
Drawer
Steam
Feeder
Tap Water
ONLY
To Next Page
Loading...
Need help?
General
