Due to our policy of continuous product innovation, some specifications may change without notification.
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
17
Electrical
Duct Connections
• Attach duct to flanges provided on the unit. The installer is responsible for sealing ducts to the flanges to prevent water leaks.
• Ductwork should be sized in accordance with the ASHRAE Handbook. Ductwork should be installed in accordance with NFPA
Standard 90A.
• When attaching duct to the unit, use a flexible/compressible material rated for duct connections. A three inch flexible connector for
both outdoor air and supply duct connections is recommended.
DUCT CONNECTIONS
To Next Page
