Before Operation (Cont’d)
Initial Settings
You can set your own Personal Preferences on the
player.
Using your DVD player very first time
When you have just connected your DVD player for the
very first time, the first on-screen menu asks which lan-
guage you prefer to use for your DVD player. Select a
language using 3/4 buttons then press SELECT/
ENTER.
This operation changes the language used for the on-
screen displays and setup menu.
Initial Settings General Operation
11
Press SETUP.
The setup menu appears.
22
Press
33
/
44
to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
33
While the desired item is selected, press
22
, then
33
/
44
to select the desired setting.
44
Press SELECT/ENTER to confirm your
selection.
Some items require additional steps.
55
Press SETUP, RETURN or PLAY to exit the
setup menu.
Language
Disc Language
Select a language for the disc’s Menu, Audio and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 22. If you enter the wrong language
code, press CLEAR.
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Either sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
DVD
DVD
12
To Next Page
Loading...
