28
INLET VALVE
1
Disconnect the wiring receptacle.
2
Unscrew 2 screws from the back.
※ When reconnecting the connector
LOWER COVER
Open the lower cover cap by using coin and pull
out the lower cover to the arrow direction after a
screw is unscrewed.
VALVE #1 (MAIN)
VALVE #2 (PRE)
VALVE #3 (HOT)
White / Black - Black
Gray / White - Black
Blue / Red - Black
DOOR
1
Open the door completely.
2
Remove the two screws from the hinge.
※ When removing the door assembly, it is
necessary to hold the bracket that is inner of
the cabinet cover.
3
1
2
To Next Page
Loading...
