LG F1***ND1 - Rotor, Stator, and Damper Assembly Disassembly; Drain Pump Filter Cleaning

29
1
Take apart the cabinet gasket clamp.
2
Unscrew 2 screws from the cabinet cover.
4
Take apart the lower cover.
3
Open the lower cover cap and unscrew 1 screw
inside.
1
Disassemble the control panel. (page 18)
2
Unscrew all the screws on the upper and lower
sides of the cabinet cover.
1
Take apart the tub gasket clamp.
2
Make sure that the drain hole of the gasket is put
beneath when reassembling the gasket.
※ efer to the arrow mark on the tub cover.
GASKET ASSEMBLY