19
OPERATING YOUR WASHER
OPERATING YOUR WASHER
❋
Do not work any button and stop the washer
(When the washer is operating) or (when a cycle is in
progress)
1. Ready mode
1) OPL type
– The cycle LEDs is lit at the same time, and displayed
‘PUSH’.
3. RINSE+SPIN
Press and hold "DELICATES" button for 3 seconds.
"RSSP" is displayed in window. (Only OPL Type)
4. Change course
You cannot change the course while the machine is
running.
5 . Cycle finish
The machine stops and LED display shows “ ”
with beeper sound.
2. Select the cycle
Press the desired button and press the start button.
The display LED will show the remaining time and the
selected cycle starts.
• Select cycles designed for different types of fabric and soil
levels.
CYCLE Wash/Rinse Temp. Spin Speed
90°C MEDICAL
Extra Hot/Cold High
75°C HOT
Extra Hot/Cold High
60°C NORMAL
Hot/Cold High
40°C NORMAL
Warm/ Cold Middle
DELICATES
Cold/Cold Low
RINSE+SPIN
(OPTION)
Cold/Cold High
WARNING
• To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUC-
TIONS before operating this appliance.
To Next Page
Loading...
