LG F1069FD2S - Pre-wash Setup

24
Programming mode - setuP mode
Entering set up mode.
You will see LqC1
Button Display
Press the
90°C MEDICAL
button.
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Display .
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Press
75°C HOT
or
60°C NORMAL
button and then select
or
.
Disable
Enable
One or the other will
display.
Press the
START
button.
The machine sets up the special price day.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
1-1. Pre-wash set up
note
• (top off) is not available in washer (Only for dryer)