LG F1069FD2S - Cycle Kill Function

35
PROGRAMMING MODE - TEST MODE
Entering set up mode.
You will see LqC1
Button Display
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Press the
75°C HOT
button until appears in the display.
Press the
START
button.
Start drain and display spin time.
Display spin time
Display with beeping.
Go back to ready mode.
4. Cycle Kill
OPL type
NOTE
• You can kill the cycle in the middle of cycle by using KILL function.