36
PROGRAMMING MODE - TEST MODE
NOTE
• Default password is 1.
If you want to change the password, you should know the present password.
Entering set up mode.
You will see LqC1
Button Display
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Press the
75°C HOT
button until appears in the display.
Set up the number you want
By pressing
75°C HOT
or the
60°C NORMAL
button.
For example, If you want to change password number to No5
Press the 75°C HOT button until “ " appears in the display.
Press the
START
button, then Password change is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
5. PASSWORD -
How to change the password.
To Next Page
Loading...
Need help?
General
