33
PROGRAMMING MODE - TEST MODE
NOTE
• Washing time 0 minutes
• Rinse cycle twice
• Top spin speed 1150 RPM
Entering set up mode.
You will see LqC1
Button Display
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Press the
75°C HOT
button until appears in the display.
Press the
START
button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
2. Factory reset -
After factory reset, machine information is changed to the default value.
To Next Page
Loading...
Need help?
General
