LG F1069FD2S - Programming Mode - Setup Mode; Setup Mode and Entering FEA1

22
PROGRAMMING MODE - SETUP MODE
Setup Mode : (display)
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
- OPL Type
1) Push the 90°C MEDICAL & 60°C NORMAL button at the same time.
2) Push the 75°C HOT button 1 times.
3) Push the START button.
- Then, the washer displays .
Entering set up mode.
You will see LqC1
Button Display
Press the
90°C MEDICAL
button.
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
1. How to enter the