How to use washer
The Beep on/off function can be set only during the washing cycle.
1. Touch the Power button.
2. Touch the Start/Pause button.
3. Touch and hold the Temp. .
and Crease Care
button simultaneously for three seconds to
set Beep on/off function.
Once the Beep on/off function is set, the setting
is memorized even after the power is turned off.
Locking the control panel
1. Touch and hold the Child Lock button for
3 seconds.
2. A beeper will sound, and ' ' will appear on
the LED display.
When the child lock is set, all buttons are
locked except the Power button.
Select this function to lock the buttons on the control assembly to prevent tampering.
"Child Lock" can be set only during the washing cycle.
Unlocking the control panel
1. Touch and hold the Child Lockbutton for
3 seconds.
2. A beeper will sound and the remaining time
for the current programme will reappear on
the LED display.
Child Lock
Beep On / Off
NOTE
Turning off the power will not reset the
child lock function. You must deactivate
child lock before you can access any
other functions.
NOTE
If you want to turn the Beeper off,
simply repeat this process.
Crease Care
To Next Page
Loading...
Need help?
General
