2
Push out PANEL ASSEMBLY, CONTROL after
Push the hook( , ) below.
1
The plate assembly(Top) is disassembled.
2
Pull out the drawer and unscrew 2 screws.
1
Two screws are unscrewed.
3
Unscrew the screws from the lower cover.
2
Disassembly cap cover and pump case.
3
Unscrew the screw from the CABINET COVER.
Remove gasket clamp and release gasket from
cabinet cover.
1
2
3
Lift the side the Control Panel Assembly and
pull it out
④
To Next Page
Loading...
