To Next Page
B
brownelizabethAug 13, 2025
Why does my LG Washer show an IMBALANCE ERROR?
- EElizabeth WrightAug 13, 2025
An IMBALANCE ERROR on your LG Washer can occur if the appliance is tilted or if the laundry has gathered to one side.
Why does my LG Washer show an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can occur if the appliance is tilted or if the laundry has gathered to one side.
What does WATER INLET ERROR mean on my LG F1403FD(5) Washer?
A WATER INLET ERROR on your LG Washer indicates that the water level hasn't reached the required level within the specified time (8 minutes after water supplied to water level(246) or 25 minutes to the preset water level).
Why did my LG F1403FD(5) Washer stop working and display POWER FAILURE?
A POWER FAILURE message on your LG Washer indicates that the washer experienced a power failure.
What to do if my LG F1403FD(5) Washer door won't close and shows a DOOR OPEN ERROR?
If your LG Washer displays a DOOR OPEN ERROR while using the reservation function or another function, ensure the door is fully closed. This should resolve the error. If the error persists, the door switch may be faulty.
Why does my LG Washer show an OVERFLOW ERROR?
An OVERFLOW ERROR on your LG Washer indicates that the water level is too high. If the error is displayed, the drain pump will automatically activate to remove excess water.
What does LOCKED MOTOR ERROR mean on my LG F1403FD(5) Washer, and how to fix it?
A LOCKED MOTOR ERROR on your LG Washer can be caused by: 1. A disconnected LEAD WIRE ASSEMBLY connector: Reconnect or repair the connector. 2. A defective hall sensor: Replace the STATOR ASSEMBLY.
What does it mean if my LG F1403FD(5) displays a HEATING ERROR?
A HEATING ERROR on your LG Washer suggests that the THERMISTOR is not working correctly.
What does SENSOR PRESSURE S/W ERROR mean on my LG F1403FD(5) Washer?
A SENSOR PRESSURE S/W ERROR on your LG Washer indicates that the sensor pressure switch is out of order.
Instructions for entering QC Test Mode by pressing specific button combinations for diagnostic checks.
Provides a diagnostic flow chart for common abnormal operations like 'NO POWER' and 'WATER INLET TROUBLE'.
Detailed troubleshooting flow for 'NO POWER' issues, checking fuses, LED status, and PWB assembly connections.
Troubleshooting for 'NO WATER SUPPLY', checking tap, water level frequency, inlet valve filter, and voltage.
Guides to resolve 'DETERGENT DOES NOT FLOW IN' issues by checking water supply, wiring, and detergent compartment.
Troubleshooting for 'SOFTENER DOES NOT FLOW IN', checking water supply, wiring, and softener cap.
Troubleshooting for 'HEATING WITHOUT WATER', checking water level frequency and voltage to the heating elements.
Guides to resolve 'DRAIN MALFUNCTIONING' by checking hose, impeller, connectors, and drain pump coil.
Troubleshooting for 'WASH HEATER TROUBLE', checking voltage and resistance of heating elements and thermistor.
Troubleshooting for continuous heating, checking water temperature display and thermistor resistance.
Diagnostic guide for drain issues, checking error 'DE', debris filter, and drain hose for blockages or damage.
General
