LG FB164DAB - Setting the Clock; TV Sound EZ Setup

10
Using your player as an alarm clock
1.Turn the power on.
2 Press TIMER. Each functions flashes.
3 Press SET when the function you want to be woken by is showing.
4 “ON TIME” will be displayed. This is where you set the time you want the
alarm to start. Use
]] IIII
/
iiii ]]
to change the hours and minutes and SET to
save.
5 The “OFF TIME” will be displayed. This is where you set the time you want
the function to stop.
6 Use
]] IIII
/
iiii ]]
to change the hours and minutes and press SET
to save.
7 You will be shown the volume (VOL) you want to be woken by. Use
]] IIII
/
iiii ]]
to change the volume and SET to save. The clock icon “ ”
shows that the alarm is set.
8 Press TIMER button 2times. You can check the setting status.
Note
• If you set the clock time, you can check the time by pressing CLOCK even
when the player is turned off.
• If you set the clock time and alarm, you can check the alarm icon “ ” by
pressing CLOCK even when the player is turned off.
Setting the Clock
1Turn the power on
11
/
]]
2 Press for at least 2 seconds CLOCK
3Choose from either
]] IIII
/
iiii ]]
AM 12:00 (for an AM and PM display) or
0:00 (for a 24 hour display)
4 Confirm your selection SET
5Select the hours
]] IIII
/
iiii ]]
6 Press SET
7 Select the minutes
]] IIII
/
iiii ]]
8 Press SET
ON UNIT
TV sound EZ setup
1 Connect the unit’s OPTICAL IN jack
to jack on optical out of your
TV (or Digital Device etc).
2 Select the AUX OPT TVtSPK
To select the AUX OPT directly.
3Enjoy sound
4To escape from AUX OPT TVtSPK
You can enjoy to sound from TV, DVD and Digital Device. Even in
power off mode, if you press TVtSPK, then power is on and
automatically changed to AUX OPT mode.
ON REMOTE
O
P
T
I
C
A
L
I
N
OUT PUT
C
O
M
P
O
M
E
N
T
COMPOMENT
V
I
D
E
O
(
P
R
O
G
R
E
S
S
I
V
E
S
C
A
N
)
VIDEO (PROGRESSIVE SCAN)
P
R
Y
M
O
N
I
T
O
R
+
FB164-P0P_DAUSLLK_ENG_5712 1/7/10 4:59 PM Page 10