Operating 15
Operating
3
Basic Operations
USB Operations
1. Connect the USB device to the USB port.
2. Select USB function by pressing F.
To Do this
Playback
Press
N
on the remote control or
T
on the unit.
Pause
Press
N
on the remote control or
T
on the unit during playback.
Searching
for a section
within a le
Press and hold
C
/
V
on the
remote control or
Y
/
U
on the
unit during playback and release it
at the point you want to listen to.
Skipping to
the next/
previous le
- In stop status,
Press
C
/
V
on the remote
control or
Y
/
U
on the unit to
go to the next/previous le.
- During playback,
Press
V
on the remote control
or
U
on the unit to go to the
next le.
Playing less than 2 seconds, press
C
on the remote control or
Y
on the unit to go to the previous
le.
Playing after 3 seconds, press
C
on the remote control or
Y
on
the unit to go to the beginning of
the le.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly, the display will
be changed in the following order.
ONE -> ALL -> SHUFFLE -> OFF
y
Do not extract the USB device during
operation. (play, etc.)
y
Regular back up is recommended to prevent
data loss.
>
Caution
Selecting a folder
and an MP3/WMA file
1. Press PRESET/FOLDER
W
/
S
repeatedly on the
remote control until a desired folder appears.
2. Press
N
on the remote control or
T
on the
unit to play it.
The first file of folder will be played.
y
USB Files are recognized as below.
*
y
Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
y
File will be played from
$
le No.1 to
$
le
No.14 one by one.
y
Files will be presented in order recorded and
may be presented differently according to the
record circumstances.
*ROOT : the rst screen you can see when a
computer recognize the USB is “ROOT”
,
Note