LG FLATRON 29UM55 - Applying Module Characteristics; LCD Module Features

5.1 Display Area
A
1) Active Display Area of the LCD Monitor Should be within Cabinet’s Bezel.
2) Distance Difference between Active Area and Bezel
| A-B|<1.0 mm , | C-D|<1.0 mm
A: The Distance from The Left of Active Area to the Bezel
B: The Distance from The Right of Active Area to the Bezel
C: The Distance from The Top of Active Area to the Bezel
D: The Distance from The Bottom of Active Area to the Bezel
C
Active area
A A B
Bezel
D
5. Applying module Character
No
Item
Co
ntent
Rem
ark
1
LC
D Module
Feature
Maker LGD
Typ
e IPS
Acti
ve Display Area 29 inches(73.025cm) diagonal (21:9)
Pi
x
el Pitch [mm]
0
.
2
0
.
0876(H)mm x RGB x 0.2628(V)mm
El
e
ctrical Interface 2ch-LVDS(41P), 2ch-LVDS(51P)
Co
lor Depth 6-bit + A-FRC, 16.7M colors
Size
(Outline) [mm]
602.2(H) x 271.1(V) x16.5(D) (Typ.)
mm(T
yp.)
Sur
face Treatment
Hard coating (3H) & Anti-Glare treatment
of the front polarizer
Op
erating Mode Transmissive mode, normally Black
Back
light Unit White LED
R/
T
Typical 14ms
Max.
28ms
St
andard Measurement Condition
n Ambient Luminance Level : dark ( < 10 lux)
n Ambient Temperature : Normal Temperature(10 ~ 25 ℃)
n warm-up Time : More than 30min (at Full White Pattern)
n Input Signal : 2560X1080@60Hz
n Contrast : 70
n Brightness : Max. 100
n 6500K : Color Temperature Setting is 6500 K( if it’s not special specification)
n Clock/Clock Phase : The Best Setting
l Another Spec.: Product Specification Standard( LG(55)G1-1034 )
l Cosmetic Spec. : LCD Module IIS Spec.
- 10 -
Copyright ©
2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only