LG FLATRON 995FT Plus - Advanced OSD Adjustments; Demagnetization and Recall Function; Moire Reduction and Convergence; Color Purity Adjustment

You can use this function when you want
to go back to the screen display of the
time you purchased the product after
adjusting to modify it in the Preset Mode.
When you are in the User mode, you can
recall only , , , , ,
,
convergence items. After using Recall,
adjust the screen display again if
necessary. If you want more information
on the Preset Mode, refer to A10 page.
A9
On Screen Display(OSD) Selection and Adjustment
OSD Adjust Description
To manually demagnetize the screen
which may show some image or color
incorrectly.
SPECIAL
DEGAUSS ON
RECALL ON
MOIRE H: 0/V: 0
CONVERGENCE H:50/V:50
PURITY :50
54.4kHz/60.0Hz
USER MODE
DEGAUSS
RECALL
This item allows you to reduce the
moire (Moire is caused by
interference Horizontal Scan Line with
the periodical dot screen). It is
normally OFF(H:0/V:0).
The moire adjustments may affect the
focus of the screen.
The screen image may shake slightly
while the moire reduction function is
on.
MOIRE
Use to adjust the alignment of red
and blue fields.
CONVERGENCE
Use to adjust the purity on the screen
if the color appears uneven.
(1) Adjust the purity of the upper left
corner of the screen.
(2) Adjust the purity of the upper right
corner of the screen.
(3) Adjust the purity of the lower left
corner of the screen.
(4) Adjust the purity of the lower right
corner of the screen.
PURITY