To Next PageTo Next Page
Need help?Do you have a question about the LG Flatron L1722P and is the answer not in the manual?
General| Screen Size | 17 inches |
|---|---|
| Panel Type | TN |
| Resolution | 1280 x 1024 |
| Aspect Ratio | 5:4 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 800:1 |
| Response Time | 5 ms |
| Input Connectors | VGA |
| Viewing Angle | 160° (horizontal) |
| Interface | VGA |
Details pin assignments and signals for the DVI-D connector.
Highlights critical safety components requiring specific replacement parts.
Provides guidelines for safely handling the LCD module and backlight unit.
Advises on electrical shock hazards and general service cautions.
Outlines essential general precautions to follow before and during service.
Details methods to prevent damage to ES devices from static electricity.
Provides best practices for soldering, including tool usage and techniques.
Step-by-step guide for removing and replacing integrated circuits (ICs).
Methods for removing and replacing discrete transistors, including power types.
Instructions for replacing diodes, fuses, and conventional resistors.
Explains how heat can damage foil and provides guidelines for repair.
Details using jumper wires to repair copper patterns at IC connections.
Describes jumper wire repair for connections other than IC pins.
Details timing specifications for various video signal modes.
Visual representation of the monitor's main functional blocks and their connections.
Describes the function of the video controller, including signal amplification and conversion.
Details the power supply components, regulators, and voltage distribution.
Outlines the MICOM part's role in control data, sync detection, and EEPROM storage.
Schematic of the LIPS board, showing power conversion and signal flow.
Explains the function of each section of the LIPS board, from EMI components to signal collection.
Guide for using Windows EDID V1.0 for monitor configuration.
Instructions for setting up the communication port required for EDID operations.
Procedures for reading, writing, and editing monitor EDID data using software.
Step-by-step instructions to access the monitor's service OSD menu.
Details the specific functions and adjustments available within the service OSD menu.
Illustrates the correct cable connections for testing and servicing the monitor.
Diagnostic flowchart and waveforms for troubleshooting 'No Power' conditions.
Diagnostic steps for 'No Raster' issues specifically related to the LIPS power board.
Diagnostic flowchart for 'No Raster' issues involving the GM5221 video controller.
Flowchart and waveforms for diagnosing 'Trouble in DPM' (Display Power Management).
Illustrates the internal wiring and connector assignments of the monitor.
Diagram showing the monitor disassembled into its component parts.
Comprehensive list of part numbers and descriptions for monitor components.
Catalog of replacement capacitors with part numbers and specifications.
Catalog of replacement diodes with part numbers and specifications.
Lists of replacement diodes, integrated circuits (ICs), and transistors.
Catalog of replacement resistors with part numbers and specifications.
Details replacement resistors, miscellaneous parts, and inductor components.
Lists components for the control board and USB board assemblies.
Circuit diagram for the monitor's scaler component.
Circuit diagram detailing the monitor's power supply unit.
Circuit diagram illustrating the monitor's connector interfaces and related components.
