LG flatron M1740A User Manual

A29
Selecting the options
(To adjust the CAPTION & VCHIP function)
Selecting and Adjusting the Screen
1. Open the OSD. -> Press the
DD
/
EE
buttons to select the Special menu, then press the
GG
button to open
the menu. -> Press the
DD
/
EE
buttons to select the Parental sub-menu, then press the
GG
button to open
the sub-menu.
2. Use the number pad to enter your password when prompted.
If you have not set a passwod, enter 0000.
If you are unable to correct the problem yourself, contact the service center.
You control access to the parental controls with a password. The default password is '0000'. You can change
the password to any four-digit number.
3. Press the
DD
/
EE
buttons to select the Set Password sub-menu,
then press the
GG
button to change the setting. Use the number button
pad to enter a new four-digit password when prompted.
4.Re-enter the new four-digit password when prompted.
Setting a password
Set Password
This menu is to be used to change password.
Once the correct current password is entered
using the number panel in a remote control, the
window for new password will appear. Enter
your choice of new four-digit password.
Lock On/Off
To select the VCHIP function ON/OFF.
PARENTAL
MENU Prev
MPAA
Age block
Content block
Set password
G
Lock on/off
Canadian
Enter code
- - - -
PARENTAL
MENU Prev
MPAA
Age block
Content block
Set password
Lock on/off
G
Canadian
Enter code
- - - -
Enter new code
- - - -
Enter new code
- - - -
Re-enter code
- - - -
Off
On
<

LG flatron M1740A Specifications

General

Brand	LG
Model	flatron M1740A
Category	Monitor
Language	English