- 7 -
Copyright 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
1. Application range
This specification is applied to 22" Wide Monitor TV used
LD73D chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Power Voltage : Standard input voltage (100~240V@,
50/60Hz)
*Standard Voltage of each products is marked by models.
(2) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(3) The receiver must be operated for about 20 minutes prior
to the adjustment.
3. Test method
3.1 Performance : LGE test method followed
3.2 Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4-1. General Specification (TV)
4. Electrical Specification
No Item Specification Remark
1 Video input applicable system PAL-D/K, B/G, I, SECAM
2 Receivable Broadcasting System PAL/SECAM BG EU(PAL Market)
PAL/SECAM DK
PAL I/II
SECAM L/L’
DVB-T
3 RF Input Channel VHF : E2 ~ E12 PAL
UHF : E21 ~ E69
CATV : S1 ~ S20
HYPER : S21~ S47
4 Input Voltage 100 ~ 240V/50Hz, 60Hz
5 Market EU
6 Picture Size 22 inch
7 Tuning System FVS 100 program PAL, 200 PR.(Option)
8 Operating Environment Temp : 10
°C ~ 35°C
Humidity : 20% ~ 80%
9 Storage Environment Temp : -10
°C ~ 60°C Non condensing
Humidity : 5% ~ 90% Non condensing
10 Display LCD Module LPL
To Next Page
Loading...
